BRONCO 2.7L PERFORMANCE CAL VOUCHER ONLY
.png)
The “Fifty States Street Legal” icon means that this part has been
determined by the California Air Resources Board (CARB) not to
have an adverse effect on emissions when installed and used properly
in the application(s) identified in the product description.
Under EPA and CARB policy, such parts may be installed in vehicles driven
on public roads and highways.
Enhance the performance of the 2.7L EcoBoost engine in your 2021-2026 Bronco. Ford Racing Parts calibrations are engineered and dyno tested to increase power and performance while maintaining reliability.
PRO-CAL 4 TOOL NOT INCLUDED!!! THIS IS THE VOUCHER ONLY!!!!
Peak Power = 355 hp @ 5,500 rpm
Peak Torque = 433 lb-ft @ 3,500 rpm
Improved throttle response throughout rpm range
Ability to change tire size up to BFG 37x12.5R17 KO2 (579 revolutions per mile). [Additional modifications required]
Ability to change axle ratio/FDU up to 5.38
Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module
For US & Canadian vehicles
Ford Racing Parts 3 year/36k mile warranty from new vehicle in-service date when installed by a Ford dealer or ASE/Red Seal certified technician
CARB E.O. #: D-431-6 for 2021-2024 models
2025 model year for Non-California vehicles ONLY!!!
The M-9603-B23VO is also available for 2.3L Bronco [NO ProCal 4 tool included]
PRO-CAL 4 TOOL NOT INCLUDED!!! YOU MUST HAVE A PRO CAL TOOL MARRIED TO THE VEHICLE YOU INTEND TO USE THE CALIBRATION ON!!!
Premium fuel required for maximum performance
Visit the FRP Performance Calibrations page to see the complete lineup.
***EXISTING PRO CAL TOOLS MARRIED TO OTHER VEHICLES WILL NOT WORK. YOU MUST HAVE A TOOL MARRIED TO THE VEHICLE YOU INTEND TO USE IT ON***
***VOUCHER AND EO LABEL WILL BE SENT WITHIN 2 BUSINESS DAYS***
***Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur***
***Calibration and ProCal 4 tool are VIN locked to a single vehicle and are not transferrable. Please contact the Tech Line with additional questions***
***NOTE*** ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode".
***NOTE*** ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
****THIS PART IS NOT RETURNABLE!!!****
